Manual Syringe Gun dispensers are designed for the controlled application of most pastes, gels, adhesives, silicones and fluids. A simple and cost-effective quality dispensing gun for use with all standard 10cc/ 10ml sized syringe barrels. Perfect for lower volume product assembly, product re-work, repair work and remote field work.
Syringe guns offer a dispensing solution for applying most low, medium and high viscosity pastes. Including flux, PVA, solder, grease, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser adding control and consistency. With a 7:1 ratio mechanical leverage for effortless trigger movement. The rod moves 3mm (1/8 Inch) once pressed to provide repeat deposits without material drips or ooze.
Push the top button to release the plunger rod for barrel attachment. Simple bayonet twist on/ twist off barrel secure connection. Barrels are held to the syringe gun by the flange. This ensures the barrel does not break or move under constant use of hand pressure. This 10cc sized dispenser is also available conveniently supplied complete with our full component kit (order part TS710SG-KIT). This basic gun is shipped with the following parts:
1 x 10cc Barrel (Choose Clear, Black or Amber Tint Colour -
1 x 10cc White PE Wiper Piston
1 x 10cc Orange Snap-on End Cap Seal
1 x Orange Twist-On Tip Cap Seal
5 x 18 Gauge Green Smooth Flow Tapered Tip
If ordering part TS710SG-KIT, a full component kit is included with the gun. This includes (50) barrels, (50) pistons, (50) end caps, (50) tip caps and (50) assorted dispensing tips.
Do not use this product with Cyanoacrylate adhesives, rapid curing pre-mixed 2K epoxies. Contact us for more suitable solutions for handling these materials.
Specifications:
Weight: 0.1kg/0.2lbs
Gun Length: 175.0mm
Maximum Thrust: 1.5kN
Handle Material: Glass Filled Nylon
Frame Material: Glass Filled Nylon
Tool Component Approvals: REACH
Cartridge Capacity: 10mL (10cc)
Mechanical Advantage Ratio: 7:1
Viscosity: Low/Medium
Standard Colour: Red
Commodity Code: 90289090
Materials: Polypropylene/ Reinforced Nylon
Warranty: 1 Year
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Materials: Polypro/ Nylon
- Capacity: 10cc or 10ml
- Length: 175mm
- Height: 135mm
- Weight: 110 gram
- Colour: Red Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following:
1 x 10cc clear barrel
1 x 10cc white wiper piston
1 x 10cc red end cap
1 x black tip cap
5 x 18 gauge tapered tips
Order part code TS710SG-KIT if a full component kit is required with the gun.Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|